Warming cabinet

[Ref : PSE - PLE]
New

Our dual-compartment warming cabinet allows you to store your fluids and/or linens 24/7 at the desired temperature, ensuring complete safety

Available in 70 L and 150 L capacities

  • Operation
    • Forced-air ventilation system.
    • Adjustable temperature from 0°C to 100°C. Pre-set to 37°C for fluids and between 50°C and 70°C for linens.
    • Compartments operate independently, each with its own temperature controller and sensor.
    • Benchtop models that can be easily placed on a table.
    • Designed for continuous operation (24/7).
  • Temperature control
    • Electronic temperature control with PID and solid-state relay, ensuring a maximum deviation of ±0.3°C.
  • Safety
    • Stainless steel doors ensuring high resistance with individual locking.
    • Power activation and locking via key-operated rotary switch.
    • Overtemperature safety with high-limit alarm.
    • Dual safety locking system:
      • Temperature lock on the controller,
      • Unit locking using a key held by the department supervisor.
  • Practicality
    • Easy to move thanks to four wheels, including two with brakes.
    • Two removable shelves per compartment.
    • No consumables required.
    • Easy to clean.
Description Specifications
Capacity (L) 300 L (2 × 150 L)
Overall dimensions (W × D × H in mm) 600 × 650 × 1660
Internal dimensions (W × D × H in mm) 476 × 496 × 1251
Internal dimensions per compartment (W × D × H in mm) 476 × 496 × 625.5

We can customize our products according to the capacity and dimensions you require.

HSC warming cabinet

PSE and PLE units comply with the following harmonized European standards:

  • CE compliance:
    • EN 50081-1: Electromagnetic compatibility (EMC), generic emission standard
      • Part 1: Residential, commercial, and light industrial environments
    • EN 50081-2: Electromagnetic compatibility (EMC), generic emission standard
      • Part 2: Industrial environment
    • EN 50082-1: Electromagnetic compatibility (EMC), generic immunity standard
      • Part 1: Residential, commercial, and light industrial environments
    • EN 50082-2: Electromagnetic compatibility (EMC), generic immunity standard
      • Part 2: Industrial environment
    • EN 61010-1: Safety requirements for electrical equipment for measurement and laboratory use
      • Part 1
  • PSE and PLE units also comply with the following directives:
    • Directive 89/336/EEC: Electromagnetic compatibility
    • Directive 73/23/EEC: Low voltage directive